|
Technical specifications
|
|
PON interface
|
Standard: IEEE 802.3ah 1000BASE-PX20+ -U
Interface number: 1 or 2
Average launch power: 0dBm~+4dBm
Wavelength: 1310/1490nm
Receiver sensitivity: ≤-27dBm
Saturation receive power : ≥-3dBm
Interface type: SC/PC
|
|
PON interface
protection
|
Working mode: support 1+1 optical protection
Protection switching time: <20ms
|
|
Ethernet
electrical
interface
|
Interface number: 4
Support IEEE 802.3
Transmission rate: 10/100Mbit/s auto-sensing
Interface type: RJ45
MDI/MDIX: auto-sensing
Working mode: full duplex/half duplex auto-sensing
|
|
Serial interface
|
Interface: 2 or 4 (optional)
Level: RS232
Operating mode: TCP / IP, client, UDP broadcast
Rate: 300bps~230.4Kbps (custom)
Data Bits: 5,6,7,8
Stop bits: 1,1.5,2
Parity: None, odd and even
Working mode: auto-sensing
|
|
Data rate
|
Uplink/downlink 1.25Gbps
|
MAC address
|
8k
|
|
Maximum
optical power
budget
|
30dB
|
Split ratio
|
1:64
|
|
VLAN
|
Support IEEE 802.1Q
Support VLAN stack
Support VLAN transform
|
Bridge
|
Store and forward mode, support
layer-2 wire-speed forwarding
Support port / flow mirroring
Support bi-directional port rate-limit
|
|
Flow control
|
Support IEEE 802.3x(full duplex
flow control) and back pressure
flow control (half duplex)
|
Multicast
|
Support IGMP V1/V2
Support IGMP Snooping
|
|
QoS
|
Support IEEE802.1p priority
Support service segment based on L1,
L2 and L3
Support queue scheduling based on
SP, WRR
Support 2 priority queue
|
Maintenance
|
Support ONU centralized
management based on GRMP
Support alarm and performance
statistics, traffic monitoring
Support remote line inspection,
such as short circuit, incomplete
circuit, and the location of failure
|
|
Serial
interface
function
|
RS232 serial interface supports software flow control
Support DNS, meet the requirement of communication through domain
Compatible SOCKET working mode (TCP Server, TCP Client, UDP, etc.), support virtual
serial interface working mode
|
|
Serial interface
configuration
mode
|
Support Windows platform configuration software and configuration parameters
Support WEB browser configuration parameter
Independent of the TCP port configured to support HyperTerminal software and Telnet configuration
|
|
Electromagnetic
Compatibility
|
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT):power supply cord:±4kV;data cord:±2kV
IEC61000-4-5(Surge):power supply cord:±4kV CM/±2kV DM, data cord:±2kV
IEC61000-4-6(RF conduction):3V(10kHz~150kHz),10V(150kHz~80MHz)
IEC61000-4-8(Frequency magnetic field):100A/m cont. 1000A/m,1s to 3s
IEC61000-4-12/18(Sasser):2.5kV CM,1kV DM
IEC61000-4-10(Damped oscillation):30A/m
IEC61000-4-16(Common-mode conducted):30V cont. 300V,1s
FCC CFR47 Part 15/EN55022:Class A & B
IEC61000-6-2( General Industry Standard), IEC61850-3( Transformer substation),
IEEE1613(Electricity sub-station)
|
|
Dimension(mm)
(W*D*H)
|
80×134×139
|
Weight
|
Single PON interface: 1.1kg
Dual PON interface:1.3kg
|
|
Power supply
|
DC supports redundant dual power supplies input
DC12~36V normal working
AC single power supply input,164V-265V AC, 47-63HZ normal working
|
Power
consumption
|
Single PON interface≤11W
Dual PON interface≤16W
|
|
Cooling
|
Single-ribbed aluminum chassis
cooling
Fanless
|
Environment
|
Working temperature: -40℃
~80℃
Storage temperature: -40℃~
85℃
Humidity : 10 % ~ 9 0 % (n o n -
condensing)
|
|
Installation
|
DIN rail card type, wall mount
|
MTBF
|
35 years
|
W koszyku produktów: 0.
